This could be dispatched much sooner, and consequently answered the purpose of Book-sellers and Printers, who purchased these sort of Works at a much chaper [sic] Rate than could be expected from an Engraver on Wood....

It does not seem reasonable that Jackson would learn the art of woodcutting from Kirkall and then refer to him as a famous engraver on copper and type metal. It is just as difficult to believe that Kirkall taught Jackson to work on metal, not wood.

The “EK” who engraved the blocks for Mattaire’s Latin Classics might very well have been Kirkall, whose style also might have had something in common with Jackson’s early work. But this would not necessarily indicate a definite influence. English pictorial relief prints for book illustration in the first decades of the 18th century had one characteristic in common; they were almost all done with the engraver’s burin on type metal or end-grain boxwood. They therefore showed elements of a “white-line” style as opposed to the black-line or knife-cut method commonly used in other countries. While it is likely that Jackson was an exception to the general rule in England (we have his word for it in the Enquiry, as we shall see), he was also deeply influenced by the prevailing English style of burin work on wood or type metal. If Papillon saw a similarity between Jackson’s cuts and those in the Latin Classics, it might have been because he was unfamiliar with other examples of English work and did not recognize a national style.

The initials “J. B. I.” appear on a small cut in the 1717 edition of Dryden’s plays, also published by Tonson. If this is an early piece by Jackson it would indicate that he might have been born earlier than 1701, although it is conceivable that he could have made it when he was sixteen.

This is the extent of the evidence, or rather lack of evidence, of Jackson’s early years in England. Nothing is certain except that woodblock work was at a

particularly low ebb. Standards in typography and printing were rude (Caslon was just beginning his career), far inferior to those on the Continent. Cuts were used rather sparingly by printers, and almost always for initial letters (these included little pictures), for tailpieces, and for decorative borders. As a measure of economy the same cut was often repeated throughout a book. Also, initial letters were sometimes contrived to permit the type for different capitals to be inserted in the center area, so that in some instances no more than two cuts were needed to begin alternate chapters in a volume. Rarely were woodblocks employed to illustrate the text. Pictures were almost always supplied by the copper-plate engraver, even when the prints were small and surrounded with typographical matter. This was an expensive and troublesome procedure, but it was the only one possible where an able group of cutters or engravers on wood did not exist and where printers found it difficult to achieve good impressions on the uneven laid paper of the time.

The main employment for knife cutters on wood was in making the popular prints, or illustrated broadsides, which had been sold in city and village throughout the country since the early 1600’s. Plank and knife could be used for these prints because of the generally large size of the pictures and the lack of sophistication of the audience. They are described by Bewick from his memories as a boy in the 1760’s:16

I cannot, however, help lamenting that, in all the vicissitudes which the art of wood engraving has undergone, some species of it are lost and done away: I mean the large blocks with the prints from them, so common to be seen, when I was a boy, in every cottage and farm house throughout the country. These blocks, I suppose, from their size, must have been cut on the plank way on beech, or some other kind of close-grained wood; and from the immense number of impressions from them, so cheaply and extensively spread over the whole country, must have given employment to a great number of artists, in this inferior department of woodcutting.... These prints, which were sold at a very low price, were commonly illustrative of some memorable exploits, or were, perhaps, the portraits of eminent men.... Besides these, there were a great variety of other designs, often with songs added to them of a moral, a patriotic, or a rural tendency, which served to enliven

the circle in which they were admired. To enumerate the great variety of these pictures would be a task.

Bewick adds that some of these popular woodcuts, although not the great majority, were very good. Since this was the main field for woodcutters, it is an interesting conjecture that Jackson might have been trained for this craft. As he matured, we can assume that he felt the urge to excel as a woodcutter and left the country to develop his potentialities.

It must be remembered that in painting and engraving England was far behind the continental countries, which could boast of centuries of celebrated masters. The medieval period persisted in England until the time of Henry VIII. Traditional religious subjects, so indispensable to European art, were thereafter generally proscribed. There was no fondness as yet for themes of classical mythology, and the new and developing national tradition in painting had to form itself on the only remaining field of pictorial expression, portraiture. Standards of style were set by foreign artists who were lured to England to record its prominent personages in a fitting manner. Beside such masters as Holbein, Zuccaro, Moro, Geeraerts, Van Dyck, Mytens, Lely, Kneller, Zoffany, and Van Loo, among others, native painters seemed crude and provincial. The list of foreign artists other than portraitists who visited England before 1750 for varying periods is also impressive.

If good native painters were rare in the first decades of the 18th century, good engravers or woodcutters were even rarer. Hogarth, whose earliest prints were produced in the 1720’s, received his training from a silversmith.

Jackson’s next move was toward the Continent.

Paris: Perfection of a Craft

Jackson arrived in Paris in 1725, his age 24 if we accept 1701 as his birth date. Here flourished a brilliant community of artists, craftsmen, dealers, and connoisseurs; woodcutting, etching, and line engraving were highly developed and the printing offices made extensive use of woodcuts for decoration and illustration. The

woodcut tradition mimicked line engraving and was confined chiefly to tiny blocks wrought with the utmost delicacy. The main influence came from the 17th century—in particular from the etchings and line engravings of Sébastien Le Clerc and from the etchings of Jacques Callot, whose simple system of swelling parallel lines, with occasional cross-hatchings, was adopted by both line engravers and woodcutters.

Le Clerc, whose style was influenced by Callot, had produced a vast number of illustrations involving subjects of almost every type; his designs, therefore, were ready-made for publishers who wanted good but low-priced illustrations. Woodcutters copied his engravings shamelessly, line for line. The overblown high Baroque style in ornament, swag, and cartouche was also drawn upon as a source for decorative cuts. In an attempt to imitate the full tonal scale of engraving, the woodcutters used heavier lines in the foreground to detach the main figures from the background, which was made up of more delicate lines. Background