قراءة كتاب Gambia

تنويه: تعرض هنا نبذة من اول ١٠ صفحات فقط من الكتاب الالكتروني، لقراءة الكتاب كاملا اضغط على الزر “اشتر الآن"

‏اللغة: English
Gambia

Gambia

تقييمك:
0
No votes yet
المؤلف:
دار النشر: Project Gutenberg
الصفحة رقم: 6

perf. point to perf. point across the stamp. Any stamp differing in width to any extent more than ½mm. from 20½mm. may therefore be set down as perforated by the single line machine.

We have seen all the values except the 2d. rose and 1/- green perforated by the single line machine, in practically every case the C.C. watermark being upright, the exception being a strip of three 6d. with the sideways watermark. All the sheets with this perforation appear to have one printer's guide dot in the centre of each side margin.

The next form of perforating machine introduced in later printings of the Crown and C.C. 1880 issue is known as a comb machine. The comb machine perforates three sides of a stamp at once, and the form of the first comb machine was arranged thus—

The arrangement of the teeth of the comb fitted the arrangement of the panes of the regular Colonial postage stamps printed by Messrs. De la Rue & Co., the narrow spaced teeth in the centre marking the dividing space between two horizontal panes.

In perforating the stamps of Gambia in the small sheets of fifteen in three horizontal rows of five, both sides of the machine appear to have been used, the extreme end portion of the comb at either end running off the side margin of the small sheet. When the left portion of the machine was being used the sheet was inserted upright and the top row of stamps perforated first, the effect being that the top margin is not cut through by vertical perforations, and the bottom row is (see plate III.).

When the right-hand portion was in use the sheets appear to have been systematically inverted when placed in the machine. This left the bottom margin blank and the top margin cut through. Had the sheet been simply inverted and perforated by the same portion of the machine, as already described, the narrow spaced teeth would have been produced on the left hand margin instead of the right. A comparison of plates III. and VI. will shew that the narrow spacing is on the right in both cases, but in III. the perforating has been started at the top on the left side of the machine, and in VI. from the bottom on the right side of the machine.

It is possible that sheets exist with the narrow spaced lines of perforation on the left side. We have searched in vain for such varieties, but they may exist. A sheet inverted when placed on the left side of the machine would shew the top margin perforated through, and narrow spaced perforation to left; while a sheet inserted top first on the right hand side would leave the top margin blank and the bottom one perforated through, and the narrow spaced perforation to left.

This comb generally perforates so evenly that there is no clashing of the perforations where the lines meet. Occasionally, however, a sheet may get off the straight and an irregular perforation occurs.

The sheets perforated in this machine generally have one guide dot in the left margin, and three at the right (see sheets III.-VII., IX.-XI., XIV., XV.).

Pages