subordinate rays and arms. To explain this it is only necessary to remind you that a liquid cylinder is an unstable configuration. As you know, any fine jet becomes beaded and breaks into drops, but it is not necessary that there should be any flow of liquid along the jet; if, for example, we could realize a rod of liquid of the shape and size of this cylindrical ruler that I hold in my hand, and liberate it in the air, it would not retain its cylindrical shape, but would segment or divide itself up into a row of drops regularly disposed according to a definite and very simple numerical law, viz. that the distances between the centres of contiguous drops would be equal to the circumference of the cylinder. This can be shown by calculation to be a consequence of the surface tension, and the calculation has been closely verified by experiment. If the liquid cylinder were liberated on a plate, it would still topple into a regular row of drops, but they would be further apart; this was shown by Plateau. Now imagine the cylinder bent into an annulus. It will still follow the same law,[1] i.e. it will topple into drops just as if it were straight. This I can show you by a direct experiment. I have here a small thick disc of iron, with an accurately planed face and a handle at the back. In the face is cut a circular groove, whose cross section is a semi-circle. I now lay this disc face downwards on the horizontal face of the lantern condenser, and through one of two small holes bored through to the back of the disc I fill the groove with quicksilver. Now, suddenly lifting the disc from the plate, I release an annulus of liquid, which splits into the circle of very equal drops which you see projected on the screen. You will notice that the main drops have between them still smaller ones, which have come from the splitting up of the thin cylindrical necks of liquid which connected the larger drops at the last moment.

Now this tendency to segment or topple into drops, whether of a straight cylinder or of an annulus, is the key to the formation of the arms and satellites, and indeed to much that happens in all the splashes that we shall examine. Thus in Fig. 12 we have an annular rim, which in Figs. 13 and 14 is seen to topple into lobes by which the rays are united in pairs, and even the special rays that are seen in Fig. 9 owe their origin to the segmentation of the rim of the thin disc into which the liquid has spread. The proceeding is probably exactly analogous to what takes place in a sea wave that curls over in calm weather on a slightly sloping shore. Any one may notice how, as it curls over, the wave presents a long smooth edge, from which at a given instant a multitude of jets suddenly shoot out, and at once the back of the wave, hitherto smooth, is seen to be furrowed or "combed." There can be no doubt that the cylindrical edge topples into alternate convexities and concavities; at the former the flow is helped, at the latter hindered, and thus the jets begin, and special lines of flow are determined. In precisely the same way the previously smooth circular edge of Fig. 8 topples, and determines the rays and lines of flow of Fig. 9.

Before going on to other splashes I will now endeavour to reproduce a mercury splash of the kind I have described, in a manner that shall be visible to all. For this purpose I have reduplicated the apparatus which you have seen, and have it here so arranged that I can let the drop fall on to the horizontal condenser plate of the lantern, through which the light passes upwards, to be afterwards thrown upon this screen. The illuminating flash will be made inside the lantern, where the arc light would ordinarily be placed. I have now set a drop of mercury in readiness and put the timing sphere in place, and now if you will look intently at the middle of the screen I will darken the room and let off the splash. (The experiment was repeated four or five times, and the figures seen were like those of Series X.) Of course all that can be shown in this way is the outline, or rather a horizontal section of the splash; but you are able to recognize some of the configurations already described, and will be the more willing to believe that a momentary view is after all sufficient to give much information if one is on the alert and has acquired skill by practice.

The general features of the splash that we have examined are not merely characteristic of the liquid mercury, but belong to all splashes of a liquid falling on to a surface which it does not wet, provided the height of fall or size of the drop are not so great as to cause complete disruption,[2] in which case there is no recovery and rebound. Thus a drop of milk falling on to smoked glass will, if the height of fall and size of drop are properly adjusted, give forms very similar to those presented by a drop of mercury. The whole course of the phenomenon depends, in fact, mainly on four quantities only: (1) the size of the drop; (2) the height of fall; (3) the value of the surface tension; (4) the viscosity of the liquid.

The next series of drawings illustrates the splash of a drop of water falling into water.

In order the better to distinguish the liquid of the original drop from that into which it falls, the latter was coloured with ink or with an aniline dye, and the drop itself was of water rendered turbid with finely-divided matter in suspension. Finally drops of milk were found to be very suitable for the purpose, the substitution of milk for water not producing any observable change in the phenomenon.

In Series II. the drop fell 3 inches, and was 1⁄5 inch in diameter.

[In most of the figures of this and of succeeding series the central white patch represents the original drop, and the white parts round it represent those raised portions of the liquid which catch the light. The numbers under each figure give the time interval in seconds from the occurrence of the first figure, or of the figure marked τ = 0.]

SERIES II.

The Splash of a Drop, followed in detail by Instantaneous Illumination.

Diameter of Drop, 1⁄5 inch. Height of Fall, 3-1⁄5 inches.

It will be observed that the drop flattens itself out somewhat, and descends at the bottom of a hollow with a raised beaded edge (Fig. 2). This edge would be smooth and circular but for the instability which causes it to topple into drops. As the drop descends the hollow becomes wider and deeper, and finally closes over the drop (Fig. 3), which, however, soon again emerges as the hollow flattens out, appearing first near, but still below the surface (Fig. 4), in a flattened, lobed form, afterwards rising as a column somewhat mixed with adherent water, in which traces of the lobes are at first very visible.

The rising column, which is nearly cylindrical, breaks up into drops before or during its subsequent descent into the liquid. As it disappears below the surface the outward and downward flow causes a hollow to be again formed, up the sides of which an annulus of milk is carried, while the remainder descends to be torn again a second time into a vortex ring, which, however, is liable to disturbance from the falling in of the drops which once formed the upper part of the rebounding column.

It is not difficult to recognize some features of this splash