The Indians were very fond of shooting at a mark both with the rifle and the bow and arrow, but they would seldom try conclusions with "Sewell" — as they all called him — for he could always out shoot them with the rifle, and very few of the tribe were as skillful as he with the bow and arrow. In wrestling too, a favorite game of the day, Mr. Newhouse was more than a match for the best men of his time both white and red.

Some time before the year 1840, Mr. Newhouse undertook the manufacture of traps and so popular had his traps become that in 1842 they were well known to all the tribes of the state, so that about this year, when a large part of the Oneidas moved to Green Bay, Wisconsin Territory, an essential part of this outfit was a stock of Newhouse's traps. Thus their fame spread to the West.

It is related that a delegation of chiefs from one of the Algonquin tribes of the Great Lake region once called at Mr. Newhouse's Shop. They had used some traps from a rival manufacturer but were much disgusted with them for in the intense cold of their country the springs would break. "As breaks the pipe of peace in war time." They looked over his stock of Traps, pressed down the springs with their moccasined feet, grunted and shook their heads in disapproval. Then Sewell went out to the frozen creek nearby, the savages watching in silence. He chopped out a huge piece of ice, and bringing it to the shop broke it into pieces which he threw into a large tub of water, then setting half a dozen of the Traps he plunged them into the water, and in sight of the astonished and pleased Red Men he sprung them all off.

This severe test was enough for the visitors, and at his own price Mr. Newhouse sold them his entire stock of traps. The affair greatly pleased the neighboring Oneidas for well they knew when their "Sewell" made and tempered a trap spring by his secret and "magical" process it would stand up to its work under any and all circumstances.

THE FIRST SHOP.

Early in the fifties Mr. Newhouse removed from his home at The Oneida Castle up the Valley to a spot now known as Kenwood. Here close by the bank of the rushing Oneida he established himself in a little smithey and began to make his famous traps on a larger scale. He was soon after assisted by some of the mechanics of the Oneida Association — as the old Oneida Community was then called — of which Mr. Newhouse had become a member. In a few years it became evident from the increasing demand that the business must be enlarged and a small factory was built for the purpose.

Still the demand continued to increase as the Community began to send out an agent to solicit orders in the West. The great Hudson Bay Company sent in some large orders a custom by the way, which they have continued annually from that early time until the present day.

More shops were erected, water power and special machinery were introduced but still the demand outgrew the supply, till finally the Community was obliged to build on a much larger scale at the present site of its factory, where the waters of Sconondoa Creek furnished for a long time ample power for the business.

Here Mr. Newhouse for many years after he ceased to work at the bench and forge, spent his time in perfecting the manufacture and in the general oversight and inspection of the work. With the eye of a lynx he was ever alert to see that no trap bearing his name went out of the factory except in perfect condition. Here before he left this world for his long, long rest he carefully educated and trained a number of men to continue the business with the same painstaking spirit he had so long maintained.

The Trap illustrated here is one of the earliest made by S. Newhouse after the business was established in the Oneida Community Shops about the year 1853.

OLD NEWHOUSE TRAP.

Every piece was hand forged from wrought iron or steel. It was roughly but strongly made and has endured for over half a century. This trap belonged to one of the pioneers of Wisconsin who had used it for many years. It is still in good working order, the spring being as lively as on the day Mr. Newhouse so carefully and skillfully forged and tempered it.

CHAPTER II.
WELL MADE TRAPS.

Among the first requisites and of the utmost importance to successful trapping is the possession of an outfit of well made Steel Traps.

That the young trappers may understand what are the requisites of a good trap we will describe in detail one that has held its own in the estimation of the professional trappers for sixty years, and then we will endeavor to point out wherein the many so-called "improvements," that have been put on the market, have uniformly failed of success.

What the main spring is to a watch, a trap spring is to a trap, and unless the spring is made of a properly compounded steel and is of the right form and proportion and correctly tempered it will surely fail and make the whole trap worse than useless.

Certain mixtures of pig iron are used in making spring steel and if these mixtures are varied from in any particular or if the steel has a surplus of carbon, or is deficient in that element, it will not take a proper temper and consequently is of no value. A proper manipulation in the rolling mill is also necessary, or the steel may be entirely ruined in rolling.

A good spring when set should show a nearly uniform curve throughout. This indicates that it is properly tapered so as to bring a uniform strain on the steel. The lasting qualities of a spring are greatly dependent on the correctness of this point.

A WELL MADE TRAP.

The "bows" or holes in the spring must be of a proportion to properly fit the jaws and have such a "twist" as will allow them to lie flat when set, and the temper must be so moderated as not to be brittle or "high", otherwise they may break if sprung without anything between the jaws. For it is well known that it is a much harder strain on any trap to be sprung thus than to snap on to the leg of an animal.

Another very important thing is to have the strength of the spring proportioned to the size of the trap, for an excessively stiff spring is more apt to break the leg bone of the animal and increase the liability of "legging" as the trappers call it, while a very weak spring may allow a vigorous animal to draw its foot out, especially if caught low down.

And last but more important than anything else, the spring must have just the right temper, for a bad tempered trap spring is like a bad tempered wife, a worse than useless encumbrance. And do not let the tyro imagine that it is easy to temper a trap spring, for it requires a long experience and very expensive and carefully studied conditions and apparatus to produce anything like uniform results.

Few persons realize the unusually trying conditions under which a trap spring has to do its work, and it is safe to say that no mechanical contrivance performs its functions with greater precision than a well made and tempered trap spring.

A No. 1 spring weighs less than three ounces and will exert a force of between 70 and 80 lbs., and one of these has been known to remain under strain for over thirty years and then spring as promptly as though just set.

The jaw of a trap should have a good wide bearing surface, otherwise it will be apt to break the animal's leg bone, a calamity always to be avoided, especially in dry land trapping, for as before remarked "legging" is thus likely