stay or leave a foot. We have 9 otter and 4 bear traps. Let us look at fox traps. We have 25 "jumpers", No. 2 1/2; these are right for dry sets. Here are 25 No. 3 Newhouse for water sets. No. 2 Newhouse is just right for coon and fisher."

Trappers in stating the size traps that they use for a certain animal show quite a difference. Some use a No. 1 Newhouse for coon while others use the No. 2 and as this is a double spring, the holding power is fully three times as much as the No. 1.

In the Northern states where the coon grows much larger than in the South and Southwest, the No. 2 Newhouse is the trap. In the South the No. 1 1/2 Newhouse is a good mink trap as is also the No. 1 1/2 Victor and No. 2 Oneida Jump.

The proper size trap to use for a certain animal, varies under different conditions. If the trapper is reasonably certain that no other species of animal than the one trapped for frequents the place then the best size for the animal being set for is the trap to use.

On the other hand, should the trapper have out some traps for skunk, which need not be larger than No. 1 of the best or Newhouse variety, and any of the dens are visited by fox a larger trap should be used. If trapping for rats and you come to "rat signs" and also where there are coon and mink signs, a trap large enough to hold either should be set.

MINK, TRAPPED UNDER AN OLD ROOT.

If blind or trail sets are made, it is well to have the trap sufficiently strong for the largest animal using it. Often different animals use the same trail or path leading from one den to another or to a log across a stream, etc.

Elsewhere a complete description of the various makes and sizes of traps to use is given and also full instructions about setting, fastening, etc. This embraces the view of the manufacture, the trapper and of the author who has had years of experience and should be of great value to inexperienced users of Steel Traps.

CHAPTER VI.
NEWHOUSE TRAPS.

In or about 1823 the first Newhouse traps were made. At that early date only a few of the smaller sizes were manufactured but these have been added to until now the famous Newhouse trap is manufactured in twenty-five different sizes. The smallest, No. 0, for rats and the largest, No. 6, for grizzly bear. These with the various intermediate sizes are adapted to catching all varieties of the fur-bearing and game animals of the world. In fact, it is said that the No. 6 will hold any living animal excepting the elephant.

Under this heading the various makes of this trap are described; excepting the Double and Webbed Jaw, which are described in another chapter.

Considerable of the description as given here is from the trap catalog of the Oneida Community, Oneida, N. Y., manufacturers of the Newhouse trap. For we believe that inasmuch as they have for more than half a century manufactured traps (during which time they have kept up a large correspondence with trappers in all parts of North America) much weight should be given their views.

NO. 0, NEWHOUSE TRAP.

This, the No. 0, is the smallest size made. Spread of Jaws, 3 1/2 inches. It is used largely for catching gophers and house rats. It has a sharp grip and will hold larger game, but should not be overtaxed.

NO. 1, NEWHOUSE TRAP.

This, the No. 1, has a spread of jaws of 4 inches. This trap is used for catching muskrat and other small animals and sold in greater numbers than any other size. Its use is well understood by professional trappers and it is the most serviceable size for catching skunks, weasels, rats and such other animals as visit poultry houses and barns.

This trap is one that can be used to good advantage for other small fur-bearing animals. Trappers use large numbers of this size for muskrat, mink, opossum, civet and marten. Fox, coon, lynx and wild cat are often caught in this trap but we do not advise its use for these large animals.

NO. 1 1/2, OR MINK TRAP.

This trap, No. 1 1/2, has a spread of jaws of 4 7/8 inches. This size is called the "Mink Trap" but it is, however, suitable for catching woodchucks, skunks, coon, etc. Professional trappers often use it for catching foxes. It is very convenient in form and is strong and reliable.

In some states where skunks grow very large, such as in parts of Nebraska, Iowa, Wisconsin, Minnesota and the Dakotas, as well as other Northwestern sections this trap is much used.

One advantage in using a trap of this size for mink is that they are caught high up and if by one of the front legs they are pretty sure to be dead before the arrival of the trapper. If used for mink at a water set, the animal generally soon drowns.

NO. 2, OR FOX TRAP.

This trap, the No. 2, has a spread of jaws of 4 7/8 inches, being the same as No. 1 /2, but having two springs, it is, of course, much stronger. This size is commonly known as the "Fox Trap." This trap is often used for taking badger, fisher and coyote.

Trappers sometimes remove one spring and use it for large coon, woodchuck and even for fox as some think with two springs the trap is too strong.

NO. 3, OR OTTER TRAP.

This, the No. 3, has a spread of jaws of 5 1/2 inches. It is designated as the "Otter Trap." It is a very powerful trap and will hold almost any game smaller than a bear.

This trap is used for taking beaver and also to some extent for small wolves and coyotes.

NO. 4, OR WOLF TRAP.

This, the No. 4, has a spread of jaws of 6 1/2 inches. This is the regular form of Wolf Trap. It is longer than the No. 3 and has one inch greater spread of jaws. It is a favorite with those who trap and hunt for a living in the Northwest and Canada. It is extensively used for trapping the wolves and coyotes in the western stock raising regions.

NO. 2 1/2, OR OTTER TRAP WITH TEETH.

This, the No. 2 1/2, has a spread of jaws of 6 1/2 inches. This is a single spring trap as shown. In some localities the otter grows to an unusual size, with great proportional strength, so that the manufacturers have been led to produce an especially large and strong pattern. The parts are heavier than the No. 3, the spread of jaws is greater and the spring stiffer.

The jaws are equipped with teeth to keep the otter from getting free when once caught. The pan is also furnished with a raised plate which can be taken off if desired.